BIOMET - capacitive biometric reader     

"fingerprint only"

1900 fingerprints in memory and only 1 second to response

-Biomet works with stand-alone systems but also with PC systems. The stand-alone unit is the OMNIA access controller, connected to the reader through a RS485 connections.
-The reader works with no need of any card or keypad, fingerprint only.
-The memory of OMNIA unit is 1900 fingerprints, and the response time is 1 second.
-Every OMNIA controller can manage 2 BIOMET readers, every controller has 2 really outputs.
-The OMNIA controller has also 2 standard inputs for wiegand or clock&data readers (proximity, magstripe,etc..)
-It is possible to declare a number of fingerprints as "administrators" and then after they touch, the BIOMET can learn other fingerprints without opening the cover box.
-The security of encrypt system is 256 bits.
-It is ideal for opening any door or alarm connection. 

CHARACTERISTICS
Power supply	9..14 V.dc
Max. consumption	200 mA @ 12 Vdc
Conenction	RS 485 bus
Weight	225 gr
Dimensions (box)	46 x 76 x 19 mm
Dimensions (front)	64 x 94 x 9 mm
Material (front)	Polycarbonate

Biometric fingerprint reader with optic technology, based in the SAGEM sensor.
 
Works as a standalone reader with a maximum of 250 fingerprints or along with an OMNIA controller (connection RS485) and optionally a TRANSEO software. Can work in combination with a 'mirafe' card or with a simple fingerprint. Without having to introduce a code in a keyboard.

For the configuration of the reader, some 'master cards are included free and they allow to add or remove fingerprints from the memory.

When used in combination of the OMNIA controllers, evey controller can manage 2 readers and memorize up to 500 fingerprints, with a response time of about 1 second. There is also the possibilit to set one fingerprint as 'manager' and allowing to add new fingerprints without the need to open the controller.

Security by encryption of 256 bits. Ideal for the aperture of doors or the activation of alarms: Only one version aviable: Surface.

13.56 Mhz proximity reader. Multi-protocol BUS-LIN/WIEGAND/ CLOCK&DATA. Format ISO 15693 and reading of serial number  ISO 14443A e ISO 14443B.

Proximity reader anti-vandalic. Embedded box of stainless steel. Of sizes 100x100x44 mm. IP protection 54.

13.53 Mhz compact proximity key that can be used as key ring. Standard ISO 15693. ECOTAG version only programmable 1 time. MOTIONTAG reprogrammable many times.

13.53 Mhz compact proximity key that can be used as key ring. Standard ISO 15693. ECOTAG version only programmable 1 time. MOTIONTAG reprogrammable many times.

868 MHz miniaturized basic transmitter, 2 or 4 channels, distance 100 mts, rolling code, APS system “Approaching System” that sends the signal 15 seconds. With “Side-Prog” system to program easily other transmitters in the same installation.

868 MHz miniaturized basic transmitter, 2 or 4 channels, distance 100 mts, rolling code, APS system “Approaching System” that sends the signal 15 seconds. Programmable in access control controllors or via ASSISTANT.

868 MHz miniaturized bitech transmitter and 13,56 MHz Motion proximity, 2 or 4 channels, distance 100 mts, rolling code, APS system “Approaching System” that sends the signal 15 seconds.

868 MHz multi-protocol radio receiver. Allows for the use of radio transmitters on the CONTROLLER-6000 unit and any unit working with wiegand or clock&data protocols. 2 channels, IP 54 and sizes 125 x 80 x 35 mm.

Proximity reader (125 KHz) with wiegand 26 data output or Clock&Data. Can be connected to any access control. Reads ACCEZ-CARD and ACCEZ-TAG. the acccez-prox is a low cost reader with small dimensions, able to be mounted in door frames and other surfaces. The reader has a dual LED's lamps and a beeper to confirm activation from controller.

Proximity card 125 KHz in ISO format, for the ACCEZ-PROX or the standalone readers ACCEZ-30-AUT or ACCEZ-1000-AUT.

Proximity key 125 KHz in ISO format, for the ACCEZ-PROX or the standalone readers ACCEZ-30-AUT or ACCEZ-1000-AUT.

433 MHz RFID active tag. The lifetime is about 5 years, the receiver is very small and could be placed anywhere. It's ideal for opening doors up to 1 to 15 meters distances.

433 MHz active tag for vehicles or assets control, it allows the use of hands-free to open doors or to indentify ant distance. It works from 1 to 15 meters with a basic receiver and up to 100 meters with a RFID receiver with an antenna. With optional tamper and movement detector.

433 MHz receiver for hands-free active tags. RS485 output, 12 V.cc power supply. Connectable to wiegand interfaces or access controllers.

Interface wiegand para receptor manos libres 433 MHz. Proporciona dos salidas de relé de presencia y alarma configurables. Dispone de salida protocolo wiegand para conectar a centrales de control de acceso.