The 2,4GHz active bracelet permits the identification of personnel. It was made to emit a high reliability signal which can also be programmed to work between 1-15 meters with a short antenna. The electronic bracelets are used both in residences or maternities and its purpose is to assure the people security. These bracelets do not contain any personal information. Only an identifier that allows the nurses to identify a kid or a resident while they’re staying in the workplace.

The anti-collision tax can surpass 80-100 tags per second.

Thanks to this unique transmission mode, the tags work properly in difficult environments, in presence materials which are hostile towards the transmission: metallic environments, concrete walls, proximity to water, etc. The modifications in the transmission remain really acceptable even in the most severe conditions.

The anti-escape system:
The active RFID antennas control the movements of the patients that have got a bracelet. In case that an user is found in a zone where he shouldn’t be, the receivers can activate an alarm, alert the personnel or block a door.

Applications
- Access Control
- Hospitals, medical sector
- Traceability
- Geo localization
- Security solutions
- Presence control

Frequency band ISM: 2.400GHz ~ 2.483GHz – Exempt of license, international cover
Temperature: IEC 60068-2-14 (Na) - Operation 10°C~55°C; storage-20°C ~ 70°C
Vibration: IEC 60068-2-64 – Fh test
Free fall: IEC 60068-2-32 part2 - Ed test
Radio regulation: ETS300-440 Rx Class 3; Tx Class 8; cyclic inform class. 2
Security: EN50364:2001 (Limit of human exposure in EM fields)

The 2,45GHz active tag allows the identification and micro-localization of objects or people. The duration of the battery it’s over 4 years (even if it’s used frequently). The system is built around innovative systems with CMOS 0.18µm low-consumption technology. This high density integration allows a more compact format and a high performance using a low emission power.

The extra slim card has the dimensions of a credit card and a IP 65 protection level. It is prepared to work in aggressive environments. The reading distance it’s between 30-50 meters in an open space and it’s done by the active tags controllers BZL-CONT-RS or BZL-CONT-LAN.

The anti-collision tax can surpass 80-100 tags per second.

Thanks to this unique transmission mode, the tags work properly in difficult environments, in presence materials which are hostile towards the transmission: metallic environments, concrete walls, proximity to water, etc. The modifications in the transmission remain really acceptable even in the most severe conditions.

Card dimensions: 54 x 85.5 x 4 mm

Applications:
- Access control
- Hospitals, medical sector.
- Logistic
- Museums
- Object management
- Fleet management
- Traceability
- Anti-falsification
- Geo localization
- Stock management
- Security solutions
- Presence control

Frequency band ISM: 2.400GHz ~ 2.483GHz – Exempt of license, international cover
Temperature: IEC 60068-2-14 (Na) - Operation 10°C~55°C; storage-20°C ~ 70°C
Vibration: IEC 60068-2-64 – Fh test
Free fall: IEC 60068-2-32 part2 - Ed test
Radio regulation: ETS300-440 Rx Class 3; Tx Class 8; cyclic inform class. 2
Security: EN50364:2001 (Limit of human exposure in EM fields)

The 2,45GHz active tag allows the identification and micro-localization of objects or people. The duration of the battery it’s over 4 years (even if it’s used frequently). The system is built around innovative systems with CMOS 0.18µm low-consumption technology. This high density integration allows a more compact format and a high performance using a low emission power.
The extra slim card has the dimensions of a credit card and a IP 65 protection level. It is prepared to work in aggressive environments. The reading distance it’s between 30-50 meters in an open space and it’s done by the active tags controllers BZL-CONT-RS or BZL-CONT-LAN.
The anti-collision tax can surpass 80-100 tags per second.
Thanks to this unique transmission mode, the tags work properly in difficult environments, in presence materials which are hostile towards the transmission: metallic environments, concrete walls, proximity to water, etc. The modifications in the transmission remain really acceptable even in the most severe conditions.
Tag domino size: 31 x 90 x 10,5 mm

Applications
- Access control
- Hospitals, medical sector
- Logistics
- Museums
- Object managements
- Fleet management
- Traceability
- Anti-falsification
- Geo localization
- Stock management
- Security solutions
- Package control
- Container identification

Frequency band ISM: 2.400GHz ~ 2.483GHz – Exempt of license, international cover
Temperature: IEC 60068-2-14 (Na) - Operation 10°C~55°C; storage-20°C ~ 70°C
Vibration: IEC 60068-2-64 – Fh test
Free fall: IEC 60068-2-32 part2 - Ed test
Radio regulation: ETS300-440 Rx Class 3; Tx Class 8; cyclic inform class. 2
Security: EN50364:2001 (Limit of human exposure in EM fields)

The pendant tag is a 2,45GHz active tag and permits the identification of personnel. It was made to emit a high reliability signal which can also be programmed to work between 1-15 meters with a short antenna.
BZL-PENDANT tags are used both in residences or maternities and its purpose is to assure the people security. These pendants do not contain any personal information. Only an identifier that allows the nurses to identify a kid or a resident while they’re staying in the workplace.

The duration of the battery it’s over 4 years (even if it’s used frequently). The anti-collision tax can surpass 80-100 tags per second.

 Thanks to this unique transmission mode, the tags work properly in difficult environments, in presence materials which are hostile towards the transmission: metallic environments, concrete walls, proximity to water, etc. The modifications in the transmission remain really acceptable even in the most severe conditions.
Size: 50 x 35 x 10 mm

Applications
- Access control
- Hospitals, medical sector
- Traceability
- Geo-localization
- Security solutions
- Presence control

Frequency band ISM: 2.400GHz ~ 2.483GHz – Exempt of license, international cover
Temperature: IEC 60068-2-14 (Na) - Operation 10°C~55°C; storage-20°C ~ 70°C
Vibration: IEC 60068-2-64 – Fh test
Free fall: IEC 60068-2-32 part2 - Ed test
Radio regulation: ETS300-440 Rx Class 3; Tx Class 8; cyclic inform class. 2
Security: EN50364:2001 (Limit of human exposure in EM fields)

 

2,4GHz active RFID tag (VEHICLE TAG size) for industrial objects. Allows a “handsfree” use for the aperture of doors or automatic barriers. Its industrial use is for the tracking of big packages or other products. The distance it’s adjustable between 1,5-15 meters. The useful life of the battery is 5 years.  

The ATEX 2,45GHz active tag controller it’s used in systems which include the family of 2,4GHz active tags. The system is built around innovative systems with CMOS 0.18µm low-consumption technology. This high density integration allows a more compact format and a high performance using a low emission power.

The controller can be equipped with a standard quarter wave antenna for a communication between 25-50 meters of distance or more, using other external antennas. The extension of the reading distance and the zone sectors division can be done with directional antennas of the types “patch” or “ceiling” for roof installation.

The receiver has ETHERNET connectivity by wire and W-LAN in the same product. The controller is adapted to different protocols. In its basic configuration, the anti-collision tax is 80-100 tags per second.

The controller firmware can be actualized and maintained up to date to protect the material investments of the client.
Health and security are the highest priorities. The active tags controller is famous because of being totally inoffensive to the electronic devices around and to all the healthy and security considerations.

Size: 126 x 104 (82.5) x 28 mm
Power supply: 5 - 12V DC, 100mA

Applications:
- Access control
- Petrochemical
- Logistic
- Object management
- Fleet management
- Traceability
- Geo localization
- Stock management
- Security solutions
- Presence control
- Container identification

Frequency band ISM: 2.400GHz ~ 2.483GHz – Exempt of license, international cover
Temperature: IEC 60068-2-14 (Na) - Operation 10°C~55°C; storage-20°C ~ 70°C
Vibration: IEC 60068-2-64 – Fh test
Free fall: IEC 60068-2-32 part2 - Ed test
Radio regulation: ETS300-440 Rx Class 3; Tx Class 8; cyclic inform class. 2
Security: EN50364:2001 (Limit of human exposure in EM fields)

The 2,45GHz active tag controller it’s used in systems which include the family of 2,4GHz active tags. The system is built around innovative systems with CMOS 0.18µm low-consumption technology. This high density integration allows a more compact format and a high performance using a low emission power.

The controller can be equipped with a standard quarter wave antenna for a communication between 25-50 meters of distance. The extension of the reading distance and the zone sectors division can be done with directional antennas of the types “patch” or “ceiling” for roof installation.

The RS232 - RS485 interface it’s in standard format. TCP / IP extension is available if requested. The controller is adapted to different protocols. In its basic configuration, the anti-collision tax is 80-100 tags per second. Many net topographies can be done, from a simple star net to more complex structures.

This receiver it’s 100% compatible with TRANSEO-PLUS software, from which can be managed the gain of the receiver and the tag reading window of time. From the synoptic section a map can be visualized and all the detected tags appear in this map. To connect this receiver with the location software it is necessary the V-EXT-RS232 interface, which manages up to two receivers and has got two relay outputs.

The controller firmware can be actualized and maintained up to date to protect the material investments of the client.

Health and security are the highest priorities. The active tags controller is famous because of being totally inoffensive to the electronic devices around and to all the healthy and security considerations. 

Size: 126 x 104 (82.5) x 28 mm
Power supply: 5 - 12V DC, 100mA

Applications:
- Access control
- Hospitals, medical sector.
- Logistic
- Museums
- Object management
- Fleet management
- Traceability
- Anti-falsification
- Geo localization
- Stock management
- Security solutions
- Presence control
- Container identification

Frequency band ISM: 2.400GHz ~ 2.483GHz – Exempt of license, international cover
Temperature: IEC 60068-2-14 (Na) - Operation 10°C~55°C; storage-20°C ~ 70°C
Vibration: IEC 60068-2-64 – Fh test
Free fall: IEC 60068-2-32 part2 - Ed test
Radio regulation: ETS300-440 Rx Class 3; Tx Class 8; cyclic inform class. 2
Security: EN50364:2001 (Limit of human exposure in EM fields)

The 2,45GHz active tag controller it’s used in systems which include the family of 2,4GHz active tags. The system is built around innovative systems with CMOS 0.18µm low-consumption technology. This high density integration allows a more compact format and a high performance using a low emission power.

The controller can be equipped with a standard quarter wave antenna for a communication between 25-50 meters of distance. The extension of the reading distance and the zone sectors division can be done with directional antennas of the types “patch” or “ceiling” for roof installation.

The receiver has got ETHERNET connectivity by wire and W-LAN in the same product. The controller is adapted to different protocols. In its basic configuration, the anti-collision tax is 80-100 tags per second.

The controller firmware can be actualized and maintained up to date to protect the material investments of the client.
Health and security are the highest priorities. The active tags controller is famous because of being totally inoffensive to the electronic devices around and to all the healthy and security considerations.

Size: 126 x 104 (82.5) x 28 mm
Power supply: 5 - 12V DC, 100mA

Applications:
- Access control
- Hospitals, medical sector.
- Logistic
- Museums
- Object management
- Fleet management
- Traceability
- Anti-falsification
- Geo localization
- Stock management
- Security solutions
- Presence control
- Container identification

Frequency band ISM: 2.400GHz ~ 2.483GHz – Exempt of license, international cover
Temperature: IEC 60068-2-14 (Na) - Operation 10°C~55°C; storage-20°C ~ 70°C
Vibration: IEC 60068-2-64 – Fh test
Free fall: IEC 60068-2-32 part2 - Ed test
Radio regulation: ETS300-440 Rx Class 3; Tx Class 8; cyclic inform class. 2
Security: EN50364:2001 (Limit of human exposure in EM fields)

Antenna suitable for WLAN applications, pointto-point connections or hotspot coverage. Indoor
and outdoor use. The antenna has been designed to be waterproof and is easy to install.
It comes with fasteners allowing wall mounting and down-tilt. This antenna is excellent for indoor WLAN access points as it mitigates effects of multipath fading. A mast mounting bracket can be ordered separately.

Electrical:
Gain (max.): 9 dBi (+- 0,5 dB)
Gain (min. over band): 8 dBi (+- 0,5 dB)
Frequency: 2,4 - 2,5 GHz
VSWR: < 1.5:1
Feed power handling: 10W
E-plane 3 dB beamwidt: 55º (+- 5º)
H-plane 3 dB beamwidth: 65º (+- 5º)
Front to back (F/B ratio): 20 dB (+- 3 dB)
Polarisation: Linear (Vertical or horizontal)

Mechanical:
Mount: Wall mount
Dimensions (l x w x h): 92 x 92 x 26mm (without bracket)
Weight: 112g (with bracket)

 

 

With the antenna mounted on the ceiling environmental influences are reduced to a minimum, making this antenna ideal for illumination of larger rooms and hallways (hotels, lobbies, offices etc.). Vertically polarized with vertical HPBW angle of 40°, Gain 2dBi. Connector N jack (female), white case. Very unobtrusive, looks similiar to a smoke detector. Diameter 115mm, height 42mm. Flexible mounting options with the included base plate.

Electrical
Frequency range: 2400~2500MHz
Bandwidth: 100MHz
Nominal impedance: 50 Ohm
Polarization: Vertical
V.S.W.R: Less than1.5
Gain: 2 dBi
Radiation pattern: Omnidirectional
Max. Power: 50 W

Mechanical
Dimensions: Ø114 x 85.3mm
Weight: 174g
Connector: N-Type Female
Mount type: Ceiling Mount
Op. Temperature: -30 ~ + 60°